USING THE GRINDER
1. Follow step by step flow pictured below to assemble the appliance.
2. In step 1, ensure the silicone ring is well placed into the grinder cup.
And then screw in the blade base in step 2 correctly.
3. Ensure the grinder cup in step 4 is placed well, if not the appliance
will not work.
4. After operation, you can disassemble the appliance following the
steps below backwards.
5. Only take the grinder from the appliance when the blade has com-
pletely stopped moving.
• Don’t let the appliance run more than 30 seconds at
a time. Allow the motor to cool at least 30 min. before
the next operation.
• Use for milling coffee beans, almonds, or similar
foods.
• To get the best performance, we suggest using the
Pulse button.
To Next Page
Loading...
