to cool at least 30 min. before the next operation.
• To get the best performance, we suggest using speed 1 or 2.
1. Follow step by step flow pictured below to assemble the appliance.
2. Ensure the bowl in step 2 and the lid in step 6 are locked, or the ap-
pliance will not work.
3. In step 4, the 4 types of blade could be used.
4. After operation, you can disassemble the appliance following the
steps below backwards.
5. Always be careful when handling the blades as they are very sharp.
6. Only open the lid when the blades have completely stopped moving.
To Next Page
Loading...
