• In step 3, ensure either the Stainless Steel knife blade or Plastic blade
is fixed well on the shaft.
• After operation, you can disassemble the appliance following the
steps below backwards.
• Only open the lid when the blades have completely stopped moving.
USING SLICER / JULIENNE / FRENCH FRIES / SHREDDER BLADE
• Please pay attention to the capacity line of the container. Once the food
reaches the max line on the container, stop operation and pour out food.
• Switch on and push down evenly with the Pusher - never put your
fingers in the feeding tube.
• Don’t let the appliance run more than 3 min. at a time. Allow the motor
To Next Page
Loading...
