Thinklogical Q-4300 - 4.5 Dry Contact Alarm

®
Q - S e r i e s V i d e o M o d u l e s P r o d u c t M a n u a l , R e v . I
Page 22
4.4.9. Adapters: RJ45 to DB9F (ADP-000025), RJ45 to DB9M (ADP-000019)
RJ45 to
DB9F ADPT
ADP-000025
RJ45 to
DB9M ADPT
ADP-000019
4.4.10. The USB Mini-B to USB-A User Configuration Control Cable (CBL000105-
002MR), for use with scaler models housed in a Q-1300 Chassis, is available
from Thinklogical. Please contact your sales representative.
USB Mini-B USB A
4.5 Dry Contact Alarm
Dry contact alarms are located on each of the individual modules. The relay is energized when there is
an alarm condition, such as over temperature or power regulation.
Normally Closed Common Normally Open
ALARM
The dry contact alarm is a Form C contact with the following ratings:
Nominal switching capacity: 1A, 30V DC
Max. switching power: 30W DC
Dry Contact Alarm Receptacle