Need help?Do you have a question about the Thinklogical Q-4300 and is the answer not in the manual?
General| Interface | Fiber Optic |
|---|---|
| Data Rate | 10 Gbps |
| Video | DVI-D |
| USB | USB 2.0 |
| Fiber | Single-mode or Multi-mode |
| Product Name | Q-4300 |
| Compliance | FCC, CE, RoHS |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Distance | Up to 10 km |
Introduction to Thinklogical and its commitment to customers.
Overview of Thinklogical's MRTS technology and video extension capabilities.
Highlights hot-swappable modules, fiber support, and compatibility.
Details the Q-4300, Q-2300, and Q-1300 chassis specifications and capabilities.
Describes physical connections: fiber optic, copper, and serial interfaces.
Features for single/dual-link DVI and RGB/DVI modules, including AV, AN options.
Details HDCP compliant modules, including features and model specifics.
Lists part numbers for various HDCP compliant Q-Series modules.
Visual reference for front panel layouts of HDCP compliant modules.
Explains fiber optic cable configurations for video and data transmission.
Covers three/four fiber connections for dual video modes.
Describes two/four fiber connections for redundant video.
Explains two/three fiber connections for dual-link video.
Lists and illustrates the various cables supplied with the modules.
Details the dry contact alarm feature and its receptacle.
Provides audio sampling rate and impedance specifications for modules.
Lists dimensions, power consumption, and cable specifications for modules.
Provides information on status indicator LEDs for troubleshooting.
Explains the status LEDs for Scaler Receiver modules.
Details status LEDs for Transmitter and Receiver modules, including fiber and network.
Instructions for updating firmware and FPGA on Q-Series chassis and modules.
Details safety symbols, regulatory compliance, and international standards.
Provides supplementary info, warnings, serial number format, and connections.
Provides website, email, telephone, and fax details for support.
Details the product warranty terms and conditions.
Explains the procedure for obtaining a Return Merchandise Authorization (RMA).
Step-by-step guide for connecting Q-Series modules with a VX160 KVM Matrix Switch.
Guide for connecting Q-Series/VelocityDVI-3 modules with a VX80 KVM Matrix Switch.
Guide for connecting Q-4300 and Velocity dvi modules for fiber optic extension.
Guide for connecting Q-4300 SDI and Velocitykvm-24 modules for video extension.
Details the front panel LCD menu options for VQM-10 AV+ Transmitters.
Details the front panel LCD menu options for VQM-10 AV+ Receivers.
Describes the LCD menu options for VQM-3 Scaler modules in Q-2300/Q-4300 chassis.
Explains how to configure Q-Series Scaler modules in a Q-1300 chassis via terminal emulation.
To Next Page