B. If you have the Echo Plus, you can connect it
directly with the RealitySwitch using the steps
Install the Amazon Alexa app on your smart
phone or tablet. Register and log in to the app,
and follow the tips shown to set up your Echo
C. If you have a 3
rd
compatible Wi-Fi to ZigBee
Hub(e.g.:Wink) , you can connect it.
Please make sure your switch is in pairing mode
and refer to the user guide of the corresponding
Note: If none operation after installing the
batteries for 3 minutes, the Switch Plus will
become a normal switch with button function.
To solve it, you can re-pair the RealitySwitch
Plus via factory reset or just remove the batteries
over 10 minutes, and then install the batteries
To Next Page
Loading...
Need help?
General
