Need help?Do you have a question about the Third Reality Smart Switch Gen3 and is the answer not in the manual?
General| Brand | Third Reality |
|---|---|
| Model | Smart Switch Gen3 |
| Type | Smart Switch |
| Compatibility | Amazon Alexa, Google Assistant |
| Max Load | 15A |
| Wireless Range | Up to 100 feet |
| Voice Control | Yes |
| Wireless Protocol | Zigbee |
| Color | White |
| Battery | No |
| Power Supply | AC |
| Voltage | 120V |
| Requires Hub | Yes |
| Power Source | Plug-in |
Remove screws from the faceplate before installation.
Insert new screws and attachment assembly for mounting.
Place batteries and match the switch clip to the panel's orientation.
Place the Smart Switch onto the existing switch following the direction marker.
Follow Alexa app instructions to set up the smart speaker and device.
Manage the smart switch within the Alexa app.
Correct inverted switch status by pressing the button for 10-15 seconds.
Perform a factory reset by holding the button for over 30 seconds.
To Next Page
