Thitronik WiPro - Page 20

1.4 Accessories
Accessories which are available include other wireless magnetic contacts,
handheld transmitters, wireless cable loops, wireless gas alarms, a GSM module
and a GPS receiver for vehicle tracking.
 Byusingotherwireless magnetic contacts (Item no: THA-2-00008), it is possible
tosecurebafeplates,windows,doors,roofhatchesandevenroofboxes.
Other handheld transmitters (Item: THA-2-00009) enable other family members
etc. to control the system and gain access to the vehicle.
Byusingthewireless cable loop (Item no: THA-2-00012), you can
secure mobile goods (such as bicycles, motor scooters, surfboards and
camping furniture etc.) against theft outside the vehicle.
Byusingoneormorewireless gas alarms (Item no: THA-2-00015),
you can protect your gas supply from the threat of gas leaks and attacks
with narcotic gases. The gas alarm immediately signals the presence of
dangerous gases in the room air to the WiPro which gives out an alarm.
When there is an alarm, the GSM module (Type no: THA-2-00034) sends an SMS
to up to 10 programmable telephone numbers. Another safety function is that when
the supply battery reaches a critical state, an SMS is dispatched with the latest
battery voltage. The air-conditioning system or heater etc. can also be switched
on or off via an SMS. The alarm system can also be switched on or off via an SMS.
Status enquiries requesting information on the status of the WiPro and the battery
state etc. can be sent at any time by calling the GMS module.
The GPS receiver (Item no: THA-2-00035) supplements the GSM module
with a tracking feature which makes it possible to locate a stolen vehicle.
If the vehicle is stolen, an alarm SMS with information on the vehicle location
and speed is dispatched automatically.
 BycallingtheGSMmodule,thestatusenquirywhichlikewisecontains
the position, speed and battery state etc. can also be activated at any time.
1.5 Scope of delivery
WiPro central unit, 20-wire connection cable, handheld transmitter, wireless
magnetic contact with 2 different adhesive pads, siren with mounting bracket,
fuse holder with 10 A fuse, status LED with 50 cm connection cable, 1x warning
sticker, installation manual and operating instructions
! All wireless components included have to be stored before installation!
WiPro „all in one“ Installation manual Page 3
GB
Thescopeofdeliveryvariesforvehicle-specicsets.Dependingonthevehicletype
the cable assembly is equipped with other cables and the fuse holder and fuse are not
included.