Thitronik WiPro - Page 27

GB
WiPro „all in one“ Installation manual Page 10
Pin assignment of the 20-pin plug connector
Pin Colour Abbreviation Function Special features
1 black bk Earth (Terminal 31) 2 brown bn Alarm input NO Activated when the system is armed and disarmed. Input for
conventional gas alarm (G.A.S.-pro). NO contact. To be isolated when not used.
3 green gn Alarm input COM 4 red rt Status LED White plug connector to connect to the counterpart of the status
LED.
5 black bk Status LED 6 red/pink r/p Smart indicator Wattlessindicatorcontroller(seevehicle-specicconnection
diagrams)
7 yellow ye Ignition (Terminal 15) 8 beige be Common pin 3 See connection diagram for Renault Master and similar models 9 pink p Horn signal Wattlesshorncontroller(seevehicle-specicconnectiondiagrams)
10 White w Antenna Do not shorten or wind up!!! 11 red r +12/24 V (Terminal
30)
12 grey gr Left indicator 13 grey/black gr/bk indicator input To connect to Terminal 30 in order to provide +12 V at Pin 12 and
14 when there is an alarm. Connect to Terminal 31 with earth- controlled indicators.
14 grey gr Right indicator 15 White w Siren +12V Connect to red siren cable or to white cable of the back-up siren. 16 white/black w/bk Siren earth Connect to black siren cable. 17 white/orange w/or CAN high Mustonlybeconnectedbyqualiedpersonnel!!! 18 violet/orange vt/or CAN low 19 blue/black bl/bk Common pin 2 Inputforinteriorlighting.SeeUniversalconnectiondiagram.On
Ford Transits, for evaluating the central locking system signals (Controlling the WiPro with remote key fob). See connection diagram for Ford Transit
20 blue bl Common pin 1
Specialist dealers can obtain vehicle-specic installation documents with precise specications for connecting the CAN line, smart
indicators, horn and central locking system evaluation and much more on request. These contain the pin assignments on the
vehicle connectors and the position of the components.