thomann Millenium Drums Mobile Drum MD-100 - Installation and Startup; Connecting Power Supply; Connecting Pedals; Connecting Headphones

4 Installation and starting up
Connect the power supply to the 12 V input on the device, and then insert the power plug into
the socket-outlet.
Connect the bass drum pedal and the hi-hat controller to the corresponding inputs on the rear
of the module.
Connect the headphones to the corresponding input on the rear of the module.
Connect external MIDI or USB-enabled devices to the USB/MIDI interface on the rear of the
module.
Use a current operating system still supported by the provider to avoid technical di‐
culties.
Connecting the power supply
Connecting pedals
Connecting headphones
USB/MIDI interface
Installation and starting up
10
MD-100
Mobile Drum