To set the volume, hit a pad while slowly turning the [volume] control clockwise.
A drum kit is a compilation in which each trigger is assigned to a certain sound and several
sound parameters. By selecting a drum kit, you can tailor the sound of your e-drum kit in sec‐
onds to the desired style of music. In addition to the 20 preset drum kits, you can create and
save 10 user drum kits (see
Ä
Chapter 10.2 ‘Kit list’ on page 40).
Press the [click] button to turn the Click function on or off. The indicator LED (9) of this button
is lit when the Click is turned on.
Use the [–] and [+] button to change the click volume. For this purpose, keep the [click] button
pressed.
The click volume is reset to the default value when the unit is switched off.
Click speed can be adjusted in a range of 30 to 280 beats per minute using the [tempo/tap –/+]
button. Press [–] or [+] briefly to increase or decrease the indicated value by one. Keep [–] or [+]
pressed to increase or decrease the value quickly.
Adjusting the volume
Selecting a drum kit
Click function
Operation
MPS-100
21
To Next Page
Loading...
Need help?
General