1. Select the desired song as described above.
2. Start or stop the playback with [start/stop].
During playback, you can turn the Click on or off as desired. For this purpose, press the
[click] button.
During playback, the indicator LED of the pads played light up. Press the
[hi-hat control] and [kick] buttons simultaneously to turn the function on or off.
1. Press the [song/volume] button.
ð
The song volume is indicated in ‘Axx’ format in the display, the Song LED on the
right below in the three-digit display turns off.
2. Adjust the volume using the [–] and [+] buttons in a range of 00 to 31.
Playing a song
Adjusting song volume
Operation
e-drum module
24