You may adjust the volume of the individual pads independently from the others. To do so,
please proceed as follows:
1. Press the [voice/volume] button to change between voice number display and voice
volume display.
ð
The display shows the current volume of the selected voice in ‘Lxx’ format.
2. Press the button of the pad whose volume you want to change. Alternatively, you can
directly activate the pad by playing it.
ð
The indicator LED of the pad lights up.
3. Adjust the volume using the [–]/[+] button.
4. Repeat steps 2 to 3 to adjust the volume of the other pads as desired.
After you have assigned all the pads with the desired voices and adjusted the respective pad
volume, you can save the settings as a user kit in the unit. To do so, please proceed as follows:
1. Press the [save] button.
ð
The display shows the first unused memory slot (‘021’).
2. Select the desired memory slot using the [–]/[+] button (range is 021 to 030).
Adjusting the volume of the
pads
Storing settings
Operation
e-drum module
28
To Next Page
Loading...
Need help?
General