thomann Millenium MPS-400 User Manual

Kick drum pedal and pad
Snap the two metal rods into the holes provided on the frame of the kick drum pedal. Place the beater into the hole provided on
the rotary head of the pedal and tighten the clamp.
Attach the drum pedal with the two screws on the bass drum pad and attach the beater to the pedal (see figure).
Then mount the support device and place the bass drum pad centred under the rack. Position the pedal centred in front of the
pad.
Assembly
MPS-400
11

thomann Millenium MPS-400 Specifications

General

Brand	thomann
Model	Millenium MPS-400
Category	Drums
Language	English