thomann Millenium MPS-450 Assembly Instructions

Mounting pads on the rack
1. Slide the plastic ends of the mounting brackets (22) up to the stop into the designated clamps on the rack. Then tighten the
wing nuts on the clamps by hand.
2. Attach pads (14, 15) to the mounting brackets (22) and hand-tighten the wing nuts of the pads.
3. Align the pads on the rack to meet your needs, then tighten the wing nuts of the brackets and the wing nuts of the pads
evenly.
Mounting cymbals on the rack
1. Unscrew the wing nuts from the cymbal holders (10) and take the felt washers o the holders.
2. Place the cymbals (13) as shown in the gure on the holders. Be sure to attach the crash pad (10 inch) to the left holder and
the ride pad (12 inch) to the right cymbal holder.
3. Place the felt washers on the cymbals (13) and x the cymbals with the associated wing nuts on the holders.
Assembly
e-drum set
10

thomann Millenium MPS-450 Specifications

General

Brand	thomann
Model	Millenium MPS-450
Category	Drums
Language	English