thomann Millenium MPS-450 Assembly Instructions

Mounting the Hi-hat on the rack
1. Unscrew the wing nuts from the Hi-hat holder (11) and take the felt washers o the holders.
2. Place the Hi-hat (12) as shown in the gure on the holder.
3. Place the felt washers on the cymbals and x the Hi-hat (12) with the associated wing nut on the holder.
Setting up the bass drum pedal
1. Engage the bolt of the foot machine (17) into the provided hole on the bass drum pad (16).
2. Place the beater (18) into the hole provided on the rotary head of the pedal (16) and tighten the fastening screw with the
drum key (23).
Aligning the beater
Pay attention to the correct orientation of the beater. The beater may only hit the bass drum pad with the plastic side, otherwise the
mesh head clothing may break.
Assembly
MPS-450
11

thomann Millenium MPS-450 Specifications

General

Brand	thomann
Model	Millenium MPS-450
Category	Drums
Language	English