What to do if I hear distortion from my thomann Speakers?
If you are hearing distortion from your thomann Speakers, it might be due to an excessive input signal. Try reducing the signal level. Avoid operating the speaker with a signal level so high that the indicator LED SIGN/LIMIT lights up solid red.
Why do noise and hum occur on my thomann Speakers?
If you experience noise and hum with your thomann Speakers, try the following: * Press the GND LIFT button, possibly on all other devices involved, if available. * Use only cables with balanced wiring. * Ensure all audio devices connect to the same power supply circuit to share a ground reference.
What to do if my thomann Speakers have no sound?
If your thomann Speakers have no sound, check the following: * Verify the position of the LINE LEVEL or MIC GAIN rotary control. * Check if the SIGN/LIMIT LED lights up green. If not, the input signal might be too weak or absent. * Ensure correct connection of the signal cables. * Inspect the signal cables and the signal source. * Try using a different signal cable.
How to troubleshoot thomann Speakers that do not work?
If your thomann Speakers are not working, check the mains connection and the setting of the mains switch POWER.
General| Max SPL | 120 dB |
|---|---|
| Woofer Size | 8" |
| Weight | 9.8 kg |
| Dispersion | 90° x 60° |
| Type | Active |
| Frequency Range | 55 Hz - 20 kHz |
| Connectors | XLR, Jack |
| Inputs | XLR, Jack |
| Outputs | XLR |
To Next Page
