Range Meaning
Display area Shows the current interconnection of input to output channels.
Input and output channels can be renamed. Click on a function area (such as ‘PEQ’ or ‘DELAY’ ) to open
the tab. Here you can enter the corresponding parameters directly.
Control area With a mouse click you can interconnect each input with each output channel. To each output channel,
an input channel or the mix of several input channels can be freely assigned. The green input channels
are assigned to the respective output channel. You can adjust the level for each combination of input
and output channel.
Operating on the computer
digital speaker management system
32
To Next Page
Loading...
Need help?
General