7 Operating
7.1 Starting the device
CAUTION!
Risk of injury due to unexpected movements of the device!
The device head may perform fast movements and generate very bright light.
This is the case immediately after the device is switched on, in automatic or
remote operation, and when a connected DMX controller is switched o. Persons
who are in the immediate vicinity of the device may be injured or frightened by
this.
Make sure that there are no obstacles within the movement range of the mirror,
and that no persons are in the immediate vicinity of the head before switching it
on and during its operation.
Switch o the device before any work is performed in the movement range or
immediate vicinity of the device, or if unauthorised persons are in that area.
Connect the device to the power supply to start operation. After a few seconds, the fans start
to work, the mirror at the device head moves to the pan and tilt home positions and the dis‐
play indicates a system reset. The device is now operational.
Operating
Hero Barrel Scan 150
23
LED Scanner