Need help?Do you have a question about the Thomas 275 SUPER CUT and is the answer not in the manual?
Details of the machine's identification label including model, serial number, and manufacturer information.
Essential advice for safe operation, including checks, forbidden actions, and personal protective equipment.
Information on safety shields and emergency stop procedures to prevent accidents.
Guidance on electrical equipment compliance and emergency response protocols.
Recommendations for proper machine usage, including running-in procedures and cutting best practices.
Detailed table of cutting capacities and technical specifications for different models.
Guidelines for transporting the machine and minimum requirements for the installation environment.
Instructions and diagrams for securely anchoring the machine to the floor.
Procedures for electrical connection, disactivating the machine, and general dismantling rules.
Instructions for assembling loose parts and overview of key functional components like the operating head and vice.
Description of the normal operating cycle, including startup sequence and safety checks.
Guidelines for adjusting the disk head and vice for optimal performance.
Scheduled maintenance tasks for daily, weekly, and monthly intervals to ensure machine longevity.
Procedures for six-monthly maintenance, oil changes, and special maintenance operations.
Guidance on lubricating coolant, oil types, and proper disposal methods.
Information on material classification and criteria for selecting the appropriate cutting disk.
Details on selecting the correct tooth pitch and recommended cutting and advance speeds for various materials.
Explanation of disk construction, tooth shapes, cutting angles, and different disk types.
Tables providing recommended cutting parameters (speed, feed) based on material and cutting angle.
A diagram illustrating cutting speeds in relation to disk diameter.
A comprehensive list of all machine components with reference numbers for ordering spare parts.
Electrical wiring diagram for single-phase operation, including component legends.
Electrical wiring diagram for three-phase operation, including component legends.
Identifies common faults related to the blade and cut, with probable causes and remedies.
Diagnoses faults related to electrical components, listing probable causes and recommended solutions.
Reports on acoustic pressure levels measured during machine operation.
Description of the optional pneumatic vice and its connection to the pneumatic system.
Information on safety plates and labels affixed to the machine.
Details of the machine's identification label including model, serial number, and manufacturer information.
Essential advice for safe operation, including checks, forbidden actions, and personal protective equipment.
Information on safety shields and emergency stop procedures to prevent accidents.
Guidance on electrical equipment compliance and emergency response protocols.
Recommendations for proper machine usage, including running-in procedures and cutting best practices.
Detailed table of cutting capacities and technical specifications for different models.
Guidelines for transporting the machine and minimum requirements for the installation environment.
Instructions and diagrams for securely anchoring the machine to the floor.
Procedures for electrical connection, disactivating the machine, and general dismantling rules.
Instructions for assembling loose parts and overview of key functional components like the operating head and vice.
Description of the normal operating cycle, including startup sequence and safety checks.
Guidelines for adjusting the disk head and vice for optimal performance.
Scheduled maintenance tasks for daily, weekly, and monthly intervals to ensure machine longevity.
Procedures for six-monthly maintenance, oil changes, and special maintenance operations.
Guidance on lubricating coolant, oil types, and proper disposal methods.
Information on material classification and criteria for selecting the appropriate cutting disk.
Details on selecting the correct tooth pitch and recommended cutting and advance speeds for various materials.
Explanation of disk construction, tooth shapes, cutting angles, and different disk types.
Tables providing recommended cutting parameters (speed, feed) based on material and cutting angle.
A diagram illustrating cutting speeds in relation to disk diameter.
A comprehensive list of all machine components with reference numbers for ordering spare parts.
Electrical wiring diagram for single-phase operation, including component legends.
Electrical wiring diagram for three-phase operation, including component legends.
Identifies common faults related to the blade and cut, with probable causes and remedies.
Diagnoses faults related to electrical components, listing probable causes and recommended solutions.
Reports on acoustic pressure levels measured during machine operation.
Description of the optional pneumatic vice and its connection to the pneumatic system.
Information on safety plates and labels affixed to the machine.
General| Brand | Thomas |
|---|---|
| Model | 275 SUPER CUT |
| Category | Cutting machine |
| Language | English |
To Next Page