Need help?Do you have a question about the Thomas 300 SUPER CUT and is the answer not in the manual?
Provides essential safety advice for machine operators, including voltage checks, shield usage, and personal protective equipment.
Outlines emergency procedures, including immediate machine stopping and reset protocols as per European standards.
Presents detailed specifications, including cutting capacity for various materials and machine technical data.
Guides the user through the step-by-step process of starting the machine and performing a cutting operation.
Outlines daily tasks for cleaning, topping up coolant, and checking safety features.
Describes weekly cleaning, filter checks, and lubrication tasks for optimal machine performance.
Offers a comprehensive table of recommended cutting parameters for various materials and cutting angles.
Guides the selection of cutting disks based on material properties, section size, and tooth pitch.
Discusses the influence of cutting speed and advance speed on heat generation and cut quality.
Presents a graphical diagram to determine optimal cutting speeds based on disk diameter.
A detailed list of all available spare parts with their reference numbers for easy ordering.
Identifies common faults related to blade and cut quality, with probable causes and remedies.
Diagnoses electrical system malfunctions, linking faults to probable causes and recommended solutions.
Provides essential safety advice for machine operators, including voltage checks, shield usage, and personal protective equipment.
Outlines emergency procedures, including immediate machine stopping and reset protocols as per European standards.
Presents detailed specifications, including cutting capacity for various materials and machine technical data.
Guides the user through the step-by-step process of starting the machine and performing a cutting operation.
Outlines daily tasks for cleaning, topping up coolant, and checking safety features.
Describes weekly cleaning, filter checks, and lubrication tasks for optimal machine performance.
Offers a comprehensive table of recommended cutting parameters for various materials and cutting angles.
Guides the selection of cutting disks based on material properties, section size, and tooth pitch.
Discusses the influence of cutting speed and advance speed on heat generation and cut quality.
Presents a graphical diagram to determine optimal cutting speeds based on disk diameter.
A detailed list of all available spare parts with their reference numbers for easy ordering.
Identifies common faults related to blade and cut quality, with probable causes and remedies.
Diagnoses electrical system malfunctions, linking faults to probable causes and recommended solutions.
General| Brand | Thomas |
|---|---|
| Model | 300 SUPER CUT |
| Category | Cutting machine |
| Language | English |
To Next Page