Thomas&Betts TBM14MC User Manual

IMPORTANT: Read and understand all of the instructions and safety
information in this manual before operating or servicing this tool.
TA02982 E page 1 of 8
Hydraulic Crimping Tool
Catalog Number: TBM14MC
1.0 General Information ..................................................................................2
1.1 General Characteristics ...............................................................................2
1.2 Overall View ................................................................................................. 2
2.0 Instruction for use ....................................................................... 3
2.1 Preparation .................................................................................................. 3
2.2 Die Advancement.........................................................................................3
2.3 Compression ................................................................................................ 3
2.4 Release of Dies ............................................................................................3
2.5 Die Replacement .........................................................................................3
3.0 Maintenance ................................................................................ 4
3.1 Cleaning .......................................................................................................4
3.2 Storage ........................................................................................................ 4
3.4 Purging Air Bubbles ..................................................................................... 4
3.5 Adding Oil ....................................................................................................4
3.6 Tool Position ................................................................................................4
4.0 Parts List for Type 2 ........................................................................ 5
5.0 Parts List for older models ............................................................... 7
Table of Contents

Thomas&Betts TBM14MC Specifications

General

Brand	Thomas&Betts
Model	TBM14MC
Category	Power Tool
Language	English

Summary

General Information

General Characteristics

Details the tool's head, application range, crimping force, pressure, dimensions, weight, and recommended oil.

Overall View

Provides a visual diagram of the hydraulic crimping tool with numbered components and operating positions.

Instruction for Use

Preparation

Guides users through preparing the tool for use, including selecting dies and inserting connectors and conductors.

Die Advancement

Explains how to advance the ram to close the dies, including safety warnings for operating under pressure.

Compression

Details the process of operating the handle to achieve compression and reach maximum pressure.

Release of Dies

Describes how to release pressure and retract the ram to open the dies.

Die Replacement

Provides step-by-step instructions for replacing upper and lower dies, including suggested ram advancement.

Maintenance

Cleaning

Outlines daily cleaning procedures for the tool to remove dust, sand, and dirt to maintain performance.

Storage

Instructs on how to properly store the tool in its rest position and in the plastic case.

Purging Air Bubbles

Explains the procedure to remove air from the hydraulic circuit to ensure optimal tool performance.

Adding Oil

Details the frequency and method for checking and adding hydraulic oil to the reservoir.

Tool Position

Illustrates the correct tool orientation and component placement for maintenance operations.

Parts List For Type 2

Parts List for Older Models