THOMSON 32FZ553 - Schedule List for Recording

EN 17
English
Using more of your TV
5. To watch the recorded programme, exit PVR mode
rst and go to Media > Video. Select the folder
PVR, then select the related record le. Press OK
to play. (It is the same if you record a digital radio
programme).
Notes:
- This feature is available only for non encrypted
digital channels. Even when CICAM (CI or
CI+) is inserted, this feature is not available on
encrypted channels.
- Before you connect the USB drive to the set,
make sure you have backed up the data in the
drive to avoid the loss of your important data due
to unforeseen malfunction.
- The bigger the USB drive free memory for the
PVR function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The set cannot play les normally if the
parameters of the le exceed the limitations of
the system, the le format is not supported, the
le is damaged, or the le cannot be decoded.
- Do not disconnect the USB drive when the
system is reading a le or transmitting data,
otherwise the system or the drive may be
damaged.
Schedule list
This function is used to perform scheduled recording.
1. Press OPTION on the remote control and select
Quick access > Schedule list.
2. Press OK to display the schedule list.
3. To add a schedule into your schedule list, press
the red button rst to display Schedule list. Then,
- Channel number: use ◄/► to select the
channel number.
- Start date: use the alphanumeric buttons to set
the recording date.
- Start time: set the starting time of the recording.
- Stop time: set the stopping time of the recording.
- Schedule type:
• Set Reminder to be reminded that you can
switch to the scheduled programme when the
time you have set comes. When time is out and
you do not execute any operation, the dialogue
box will disappear and no further operation will
be executed.
• Set Record, if you really want to start your
scheduled recording when the time you have
set comes. When time is out and you do not
execute any operation, scheduled recording will
start automatically.
- Repeat type: set different repeat modes for the
recording.
4. Press ▲/▼/◄/► to select Add, then press OK to
add the schedule you set into your schedule list.
5. Press the red button to repeat above procedures
to add another schedule.
6. If you wish to edit or delete a schedule, select it
and press OK to enter.
7. Press EXIT to close the menu.