EN 20
English
Chapter 7 - DLNA (Share & See)
Note: This manual covers products with either
Share & See or DLNA function. Share &
See is DLNA-compatible.
Connecting to your PC
Make sure to set up a wired or wireless connection
from your TV to a router rst. Then connect your
PC to your router either through a network cable
or wirelessly. Also make sure to select Network >
Network settings > Internet Connection, then
On, and that your computer rewall won’t block the
connection.
Enabling DLNA function
Select Network > DLNA, and set it to On.
Follow the steps in turn specied hereafter, then you
can enjoy recorded video, image and music saved on
your PC.
Adding media from your PC for sharing
Install a DLNA media server on your PC. The simple
and familiar server you may install is Microsoft
Windows Media Player 11 and 11 above. Follow the
instructions below to allow your TV to access the
designated les on your PC.
1. Open the Microsoft Windows Media Player 11.
- Select Library > Media sharing.
- Check the checkbox Share my media to.
- Select the icon of the TV set connected to your
PC.
- Select Allow to allow the TV set to access your
PC, and select OK to enable the access.
Note: Use the Settings button to customize your
desired settings.
2.
- Select Library > Add to Library.
- Select your personal folders or folders of other
users that you can access for sharing.
- Select Add and press OK to enable the addition.
DLNA application
Select Media in the main menu and press OK to
enter media center. Then you can view photos, listen
to music or watch videos, which are stored on your
PC.
Note:
- If DLNA is switched on, the TV will display the
list of available DLNA servers which are available
in local network.
- Supported le formats:
Photo: JPEG
Music: LPCM
Video: MPEG2