3
SAFETY INTRUCTIONS
1)
Read this Instruction Manual before you attempt to connect or
operate the appliance.
2)
Keep these instructions in good condition. Heed all warnings. Follow all
instructions.
3)
Save this Instruction Manual for future reference.
4)
The product shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the product. Dry
location use only.
5)
No naked flame source, such as candles, should be placed near the product.
6)
Children should be supervised to ensure that they do not play with the appliance.
7)
Ventilation should not be impeded by covering the ventilation openings.
8)
Make sure that the unit is plugged into an power outlet with suitable
power rating. Using higher voltage may cause the unit to malfunction.
Turn off the unit before unplugging it from a power source to
completely switch it off.
9)
Do not plug/ unplug the power plug into/from an electrical outlet with wet hands.
10)
If the power plug does not fit into your outlet, do not force.
11)
Only use accessories which are specified by the manufacturer.
12)
Install the unit in accordance with the manufacturer’s instructions.
13)
Press the player’s buttons gently. Pressing them too hard can damage the player.
14)
Always ensure that the product is unplugged from the electrical outlet
before moving or cleaning. Clean it with dry cloth only.
15)
Unplug the product during lightning, storms or when it will not be
used for long periods of time.
16)
This product has no user-serviceable parts. Do not attempt to repair
this product yourself. Only qualified service personnel should perform
servicing. Take the product to the electronics repair shop of your
choice for inspection and repair.
17)
NEVER let anyone, especially children, push anything into holes, slots
or any other openings in the unit’s casing as this could result in a fatal
electric shock.
18)
Do not leave the unit unattended when in use.
NOTE: When the system is switched to standby mode, it is still consuming power. To
disconnect the system completely, remove the AC power plug from the wall outlet.
To Next Page
Loading...