EN-14
2. Wit
h a flat screwdriver or a coin, turn the screw to the "unlock"
position. Disassemble the brush roll to clean it and reassemble it once
all parts are completely dry.
Advi
ce: The brush roll and its cover are washable.
Make sure they are completely dry before use.
ATTENTION
1. If the dust blocks the airflow of the floor brush, please clean it with a
stick.
2. With the exception of the roller brush and its cover, all other items
cannot be washed with water.
3. Do not apply oil to both ends of the roller brush
4. Do not touch the roller brush while it is in operation and stay away
from the air outlet during use.
5. Do not use it when wheels or nylon buckles of the purifier are
damaged.
6. Use only with power supply unit supplied with the device.
To Next Page
Loading...
