- EN 8 -
3. Press the button to hear the next tracks on the disc.
4. Press and hold the
button. The current track will be scanned in reverse . When the desired
track section is found, release the button and normal playback will resume.
5. Press and hold the
button. The current track will be advanced rapidly ; when the desired track
section is found, release the selected button and normal playback will resume.
Repeat function
The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the PROG/REP/PRESET button once during playback, the “1
” sign will appear on the
LCD Display. The same track will play repeatedly.
2. Press the REPEAT button a second time to repeat all tracks. The “All
” sign will appear on
the LCD display.
3. To cancel REPEAT PLAY, press the PROG/REP/PRESET button repeatedly until the relevant sign
disappears.
Random play
Press the REPEAT button 3 times during playback. “RAND” appears on the display.
All the tracks on the CD will play in a random order.
Program function
The Program feature may be used to program up to 20 tracks to play in a selected order.
1. While in Stop mode only (CD is not playing), press the PROG/REP/PRESET button. The LCD
display will show “PROG P 01”.
2. Press the
and buttons to allocate the desired track.
3. Press the PROG/REP/PRESET button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the Program mode), press the PLAY/PAUSE/SCAN button.
6. Press the
button to hear the previous program track or press the button to hear the next
program track.
Note: After all the programmed tracks have been played, the CD player will return to Stop mode.
7. To clear the programmed tracks from the memory, press the STOP/SELECT button.
MP3 disc section
Note: MP3 discs have a large capacity; disc access times are a little longer.
1. Press the POWER/MODE button to turn on the unit.
2. Press the POWER/MODE button repeatedly to select CD mode.
3. Press the EJECT/+10 button to open the CD door and insert a CD into the tray with the printed
label side facing up. Press the EJECT/+10 button again to close the CD DOOR and the disc will
rotate for a few seconds, then automatically play the 1st track.
4. Press the
and buttons to select a track (or press the 10+ button on the remote control).
5. To temporarily stop playback, press the PLAY/PAUSE/SCAN button. To resume, press again.
6. Press the STOP/SELECT button to stop playback.
Repeat Playing Function
Single track repeat
Press the PROG/REP/PRESET button once to repeat a single track. The display will show “1
”
Whole disc repeat
In Play mode, press the PROG/REP/PRESET button 2 times to repeatedly play all tracks on the disc.
The display will show “All
”.
To cancel repeat play, press the PROG/REP/PRESET button repeatedly until the “All
” sign disappears.
Random Function
Press the PROG/REP/PRESET button 3 times, “RAND” appears on the display.
Press the PLAY/PAUSE button to begin random playback.
To cancel the random function, press the PROG/REP/PRESET Button repeatedly until the relevant
sign disappears.
To Next Page
Loading...
