7
1. Plug the AC cord plug into a convenient AC wall outlet.
2. The power indicator will be lights up with ‘Red’ colour. The unit enters
into ‘STANDY BY’ Mode.
2. Press the
Button on main unit or press & hold the key on remote
control to turn on the unit.
3. Press and hold the
Button on main unit or the key on remote
control to turn on the unit to switch the unit back to Standby mode.
4. Remove the power plug out of the AC wall outlet if you want to switch off
the main voltage completely.
How to change the play mode
Press the MODE Button during power on, the play mode will be changed
between the Bluetooth mode and AUX-IN mode, the power indicator will be
in different colour during different play mode:
Green colour for Aux-in mode
Blue colour for Bluetooth mode
SPECIAL TIPS:
If Blue colour indicator flashes means that the speaker is available for
pairing with other Bluetooth devices now, and if pairing is completed, the
blue colour indicator stops flashing.
Playback via Bluetooth
Bluetooth involves a technology for wireless radio connection of devices
over a short distance. Devices with Bluetooth standard are transmitting
between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and
Medical). Interference can be caused for example by WLAN-networks,
DAB radios, cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth enabled device.
The functional radius is limited to approx.10 metres depending on the
surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio
Distribution Profile) and has a music-player function, then you can also
To Next Page
Loading...
