EN-14
• Wiping
Application : The robot washes all the pieces following a zigzag path.
Configuration: Mount the washing support on the dust container and
water tank assembly, insert the assembly into the robot, then choose
Wash mode on the remote control.
Remark : In washing mode, only the water tank operates and the fan
remains off.
• One-piece cleaning
Application : This mode is used to clean a specific room. The
robotcleans a maximum area of 4m x 4m around it. Once the cleaning
is complete,the robot returns to the charging station to recharge.
Configuration: Press the key on the remote control.
• Cleaning along baseboards
Application : In this mode, the robot cleans the floor along the wall or
other stationary object on the right and returns to the charging station
when the cleaning is complete.
Configuration: Press the key on the remote control.
Manual control
Application : This mode allows you to manually control the cleaning
operation.
Configuration: Press the key on the remote control to control the
movements of the robot, such as moving forward, backward or turning.
• Fixed area cleaning
Application : This mode is used to clean a dirty area repeatedly. The
robot moves in a spiral to clean the area and returns to the starting
point when the cleaning is complete.
Configuration: Press the key on the remote control.
To Next Page
Loading...
