EN-24
Maintenance of charging electrodes, anti-drop sensors,
training wheels and caster
Note: The charging electrodes, anti-drop sensors and the bumper
contain sensitive electronic components and should be cleaned with a
dry cloth. Using a damp cloth can damage electronic components.
1.
Clean the charging electrodes.
2.
Clean the anti-drop sensors.
3.
Cleaning the drive wheel and caster.
* If the product will be left unused for an extended period of time, fully
charge the product and turn off the power before storing it. Charge
the product every three months to avoid over-discharging the
battery.
To Next Page
Loading...
