THOMSON TM9178 - Creating and Managing Playback Programs

EN
mp3 and CD Player
12
Creating the Program
For normal audio CDs:
1. In CD stop mode, press SET to enter
program mode.
The MEMORY icon shows on the display.
2. Press TRACK / TUNE or to select
the track to be stored.
3. Press SET to store the selected track.
4. Repeat step 2 and 3 to continue
programming.
5. Press PLAY/PAUSE in program mode
to start program playback.
Press STOP to exit program creating
mode.
For mp3 / WMA CDs:
1. In CD stop mode, press SET to enter
program mode.
The MEMORY icon shows on the display.
2. The FOLDER icon and number flashes on the
display. Press FOLDER UP or DOWN
to select the folder and press SET.
3. Press TRACK / TUNE or to select
the track from the selected folder to be
stored.
4. Press SET to store the selected track.
5. Repeat step 2 and 4 to continue
programming.
6. Press PLAY/PAUSE in program mode
to start program playback.
Press STOP to exit program creating
mode.
Displaying Program List
Press SET repeatedly to recall and display
program.
Deleting the Program
Press STOP in CD stop mode to delete all the
stored tracks.
Tips:Tips:
Tips:Tips:
Tips:
Opening the CD compartment door or
switching mode will delete all the stored
tracks.
Note:Note:
Note:Note:
Note:
• The unit can program up to 20 normal
audio CD tracks and 10 mp3 / WMA
tracks.
• Folder program is not supported by this
unit.
Note:Note:
Note:Note:
Note:
The unit remains in program mode once
programming track is done.