THOMSON TM9178 - Tape Player; Playing Cassette Tapes; Recording to Tape

EN
Tape Player
Playing a tape
1. When the unit is turned off, press ON /
STANDBY to turn the unit on to the
previously used mode.
Press RADIO / CD / TAPE to select Tape
mode.
2. Press STOP/EJECT to open the tape deck
door.
3. Insert a tape into the door and push the
door closed.
4. Press REW or FWD to wind the tape to the
desired starting position. Press STOP/EJECT
to stop winding.
5. Press PLAY to start playback.
Press PAUSE to pause playback (press again
to release the button to resume playback).
Press STOP/EJECT to stop playback.
Recording to tape
From radio
1. Insert a tape into the deck.
2. Press RADIO / CD / TAPE until RADIO mode
is selected.
3. Press STOP / BAND to access the desired
radio band.
4. Press TRACK/TUNE or to tune to
the station to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Press PAUSE or STOP to pause or stop the
recording respectively.
From CD
1. Insert a tape into the deck.
2. Press RADIO / CD / TAPE until CD mode is
selected.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Play the track or program to be recorded.
7. Press PAUSE or STOP to pause or stop
recording respectively.
Note:Note:
Note:Note:
Note:
For better recording quality, use normal
bias tape (Type I) only.
Attention:Attention:
Attention:Attention:
Attention:
Be sure to slide the cassette into the tape
slot on the door. Do not place the tape
directly onto the tape mechanism.
13