The flames have
suddenly gone out.
There is a power
failure – can I still
use the cooktop
burners?
A draft or a spill has
extinguished the flame.
Power outage in your
area.
No action required. The burn-
er will detect this and auto-
matically relight. However,
if there has been a large spill,
we recommend turning the
burners off and cleaning the
burners and sump area. See
‘Care and cleaning’ for in-
structions
The cooktop burners can still
be used. To light them:
Holding a lighted match to the
flame spreader, push in on the
control knob and turn coun-
terclockwise to LITE.
When the flame is burning all
the way around the burner,
you may adjust the heat.
Important!
If the flame is blown out
during a power failure, turn
the knob immediately to OFF,
as the burner will not auto-
matically relight and gas may
escape.
35
TROUBLESHOOTING GUIDE
To Next Page
Loading...
