EasyManua.ls Logo

Thor Kitchen ARG30 - User Manual

Thor Kitchen ARG30
42 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
COOK
LIKE
A
GOD
ARG30 | ARG36
ARG MODELS

Table of Contents

Other manuals for Thor Kitchen ARG30

Preview: Use And Care Manual
Use And Care Manual42 pages

Questions and Answers

  • C
    Carol HuntAug 19, 2025
    Why are my Thor Kitchen ARG30 burner flames very large and yellow?
    • M
      Monica HollowayAug 19, 2025
      Large, yellow burner flames on your Thor Kitchen Ranges usually indicate that the burner bezel ports are clogged, burner ports or caps are not correctly positioned, the cooktop is using the wrong gas type, or the regulator is faulty or incorrectly set. Try cleaning the burner bezel ring ports with a straightened paper clip, needle, or wire. Also, remove and carefully reinstall the burner bezel and caps. Ensure the cooktop matches the natural gas supply, and check the regulator installation, replace it if necessary, or set it for the proper gas type.
  • R
    rebeccaedwardsAug 21, 2025
    Why my Thor Kitchen Ranges oven is not heating?
    • C
      Curtis BeltranAug 21, 2025
      If your Thor Kitchen oven isn't heating, first check that the circuit breaker hasn’t tripped and there is no power outage. If there is a power outage, you cannot use the oven until power has been restored. Also ensure there is a gas supply for gas ovens. Contact your local gas supplier if necessary.
  • D
    David NovakAug 23, 2025
    Why are the flames on my Thor Kitchen Ranges burner very large and yellow?
    • J
      John DeanAug 25, 2025
      If the flames on your Thor Kitchen range burners are very large and yellow, try the following: Clean the burner bezel ring ports using a straightened paper clip, needle, or wire. Also, remove and carefully reinstall the burner bezel and caps. Make sure the type of cooktop matches the natural gas supply. Check the installation, replace the regulator, or set the regulator for the proper gas type.
  • R
    Rebecca AlvaradoAug 26, 2025
    What to do if Thor Kitchen Ranges igniters spark continuously after flame ignition?
    • M
      markthomasAug 26, 2025
      Continuous sparking after flame ignition in your Thor Kitchen Ranges suggests a reversed power supply polarity or wet/dirty igniters. To resolve this, have the polarity corrected and dry or clean the igniters.
  • D
    dustin73Aug 28, 2025
    What to do if my Thor Kitchen ARG30 Ranges burner flame goes out at low setting?
    • D
      Devin WolfAug 28, 2025
      If the burner flame on your Thor Kitchen Ranges goes out at a low setting, it could be due to low gas supply pressure or obstructed air intake holes around the knobs. Contact your gas company to check the gas supply pressure. Also, remove any obstructions around the air intake holes near the knobs.
  • J
    jacob71Aug 30, 2025
    What to do if Thor Kitchen ARG30 Ranges has sparking but no flame ignition?
    • B
      Beth GonzalezAug 30, 2025
      If your Thor Kitchen Ranges is sparking but the flame won't ignite, the gas shut-off valve might be in the ‘OFF’ position. Turn the shut-off valve to the ‘ON’ position to allow gas flow.
  • R
    rharrisSep 1, 2025
    How to fix Thor Kitchen Ranges burners that will not light?
    • A
      Amanda TravisSep 1, 2025
      If some burners on your Thor Kitchen Ranges won't light or the flames don't burn all around the burner cap, it's possible the burner parts or igniters are wet, dirty, or misaligned. Ensure the burner parts and igniters are clean, dry, and correctly assembled. Refer to the ‘Care and cleaning’ section for detailed instructions.
  • A
    Andrea StaffordSep 3, 2025
    How to use Thor Kitchen Ranges cooktop burners during a power failure?
    • J
      Jason BrennanSep 3, 2025
      If the power goes out, you can still use the cooktop burners on your Thor Kitchen range. Hold a lighted match to the flame spreader, push in on the control knob, and turn it counterclockwise to the LITE position. Once the flame burns around the burner, adjust the heat as needed. Important: If the flame goes out during a power failure, immediately turn the knob to OFF, as the burner won't automatically relight and gas may escape.
  • S
    Shelby BensonSep 5, 2025
    How to fix Thor Kitchen Ranges burners that won't light or have uneven flames?
    • C
      cdaySep 5, 2025
      If some burners on your Thor Kitchen range won't light or the flames don't burn all around the burner cap, check that the burner parts and igniters are clean, dry, and correctly assembled. Refer to the 'Care and Cleaning' section for instructions.
  • L
    Lisa CookSep 7, 2025
    What to do if my Thor Kitchen Ranges is sparking but there is no flame?
    • R
      Robert SimpsonSep 7, 2025
      If sparking occurs but there is no flame ignition on your Thor Kitchen range, make sure the gas shut-off valve is in the ‘ON’ position.

Thor Kitchen ARG30 Specifications

General IconGeneral
Fuel TypeGas
Burner TypeSealed
Number of Burners5
Ignition TypeElectronic
Cooktop SurfaceStainless Steel
ColorStainless Steel
Width30 inches
Oven FeaturesConvection
Dimensions (WxDxH)30 x 27 1/2 x 39 in.
BTU per Burner15, 000 BTU
Oven BTU18, 000 BTU
TypeFreestanding
Warranty2 year warranty parts and labor

Related product manuals