Thor Kitchen ARE30 - User Manual

Essential safety precautions for operating and servicing the appliance.

Guidelines and precautions related to the self-cleaning oven function.

General operational guidance and safety for the oven component.

Instructions for cleaning and maintaining the vent hood for safety.

Location of the model and serial number tag on the rear of the unit.

Location of the model and serial number tag on the oven door frame.

Step-by-step guide for safely removing the oven door.

Instructions for accessing and removing the appliance's control panel.

Procedure for replacing the main relay printed circuit board (PCB).

Steps for replacing the infinite switch controlling surface elements.

Guide to removing the rear panel for component access.

Procedure for accessing and replacing the main terminal block.

Steps to locate and replace the oven's thermal safety cutout.

Procedure for replacing the oven temperature sensor (NTC thermistor).

Guide for removing and replacing the oven's cooling fan assembly.

Steps for accessing and replacing the convection fan motor.

Procedure for removing the concealed bake element.

Steps for removing and replacing the oven's broil element.

Guide for removing the toe kick panel at the base of the appliance.

Instructions for removing the side panels for access.

Steps to remove the cooktop glass assembly.

Procedure for removing and replacing surface heating elements.

Steps to replace the hot surface indicator light.

Procedure for accessing and replacing the oven door switch (ARE36 model).

Procedure for accessing and replacing the oven door switch (ARE30 model).

Steps for removing and replacing the oven door hinge receiver.

Guide to removing the support bracket for the hinge receiver.

Procedure for replacing the oven interior lamp bulb.

Steps to remove the outer stainless steel door skin.

Guide for replacing the outer glass panel of the oven door.

Procedure for removing the oven door hinges.

Steps for removing and replacing the inner door glass.

Instructions for removing and replacing the oven door gasket.

Identification of terminal locations on the main relay PCB.

Overview of control voltage distribution on the PCB.

Testing procedure and normal/abnormal resistance values.

Testing procedure and resistance values based on temperature.

Test procedure for door switch continuity.

Test procedure and operating voltage for the cooling fan.

Test procedure and voltage checks for the Hall sensor.

Testing procedure and resistance values for the broil element.

Testing procedure and resistance values for the bake element.

Voltage check across ACL and ACN terminals on the main PCB.

Test procedure and resistance values for the hi-limit thermostat.

Test procedure for control panel light switch continuity.

Testing procedure for dual zone elements at LF & RF locations.

Testing procedure for single zone elements at LR, MR, RR locations.

Testing procedures for single zone infinite switches.

Testing procedures for dual zone infinite switches.

Accessing and setting the clock function.

Toggling between Fahrenheit and Celsius temperature display.

Enabling or disabling audible alerts and sounds.

Viewing the last five stored error codes.

Adjusting the oven temperature calibration.

Displaying the current software version of the control unit.

Configuring the 12-hour automatic oven shut-off safety feature.

Activating or deactivating the product demonstration mode.

Performing a factory reset to restore default settings.

Troubleshooting and resolution for E0 error (NTC sensor fault).

Troubleshooting and resolution for E2 error (PCB temp sensor).

Troubleshooting and resolution for E3 error (oven not heating).

Troubleshooting and resolution for E5 error (over temperature).

Troubleshooting and resolution for E09 error (CPU clock deviation).

Troubleshooting and resolution for E10 error (CPU chip fault).

Troubleshooting and resolution for E15 error (PCB over temp).

Troubleshooting and resolution for E17 error (cooling fan sensor).

Diagnostic steps for issues with no power or display.

Troubleshooting steps for bake element not heating.

Troubleshooting steps for broil element not heating.

Troubleshooting steps for convection fan not running.

Specific troubleshooting for E00 error code (sensor issue).

Specific troubleshooting for E17 error code (fan sensor issue).