Thor Kitchen ARE30 - Slide 35

Thor Kitchen internal use only
Component Access
Replacing inner door glass -
Cont.
4. Carefully remove door insulation pack.
Fig.04
5. Carefully remove the inner insulation
pack. Fig.05
6. Remove the two inner heat-treated glass
panels. Glass panels are supported by
stainless steel inner support. Fig.06
Reassembly of door glass
1. Reassemble in reverse order.
2. Be sure glass is clean on all sides and
there is no fingerprints or insulation
fibers on the glass panels.
3. See next page for assembly process for
the inner most two panels of the oven
glass ( two closest to oven cavity)
Direction of the glass placement is
critical to the insulation value of the
door.
Fig.04
Fig.06
Fig.05