Start to Use
You ought to get a good knowledge of all
safety precautions and make sure that your
refrigerator has been placed properly in its
final position before using.
1. Unpacking
Please install the decorative cover for bottom
beam onto your refrigerator after unpacking
and adjust the front leveling legs to level
your refrigerator.
2. Connecting Your Refrigerator to the Power
Supply
Your refrigerator will enter the factory
default setting after connecting to the power
supply, and it will display target temperature
for both refrigerator compartment and
freezer compartment.
3. Work Modes of Your Refrigerator
You can set your refrigerator in either of the
following two ways:
Auto Mode: We suggest you to choose this
mode if you have no special requirements for
the setting. Your refrigerator will work
automatically after you chose this mode.
Manual Mode: You can set the temperature
by pressing the temperature adjustment key.
4. Store Food into Your Refrigerator
You can put your food into the refrigerator
after a period of time (About hours in
summer) when the refrigerator has already
fully refrigerated its interior compartments.
Tips: The interior temperature may require a
certain period of time to reach the target
temperature if the setting temperature is
changed or other food is stored inside of the
refrigerator. Such a period of time depends
on the change to the setting temperature,
the surrounding temperature, opening
frequency, the amount of the stored food
and etc.
To Next Page
Loading...
