MAINTENANCE SCHEDULE:
9
The whole machine
Control handle/stop button
Air Filter
Fuel Filter
GasTank/Gas Tank cover
Gear Box/Cylinder
Silencer
Cylinder Cooling Fin
Spark Plug
Screw and Nut
If Necessary
Temporary Failure
Every Month
Every Week
After Filling Oil
After Work (every day)
Before Work
The following data are general data for the
product. Under the worse working conditions such
as thick dust or long work hours of the post driver,
the maintenance cycle should be shortened
accordingly.
Outlook check (state,
tightness of screws)
Clean
Function check
Clean
Replace
Check
Replace
Clean
Check
Tighten
Clean
Add oil
Check
Remove carbon deposit
Check
Clean
Check/Adjust the distance
between electrodes
Replace
Check
Tighten
To Next Page
Loading...