Do you have a question about the THOR V SERIES and is the answer not in the manual?
Details the 300W Class D amplifier, its efficiency, and low distortion performance.
Describes the redesigned driver for increased cone travel and durability.
Explains the use of DSP for signal control in distinct music and theatre modes.
Discusses the redesigned cabinet with improved vents and damping for better acoustics.
Automatically powers the subwoofer on/off based on signal detection.
Protects the amplifier by reducing clipping and preventing shutdown.
Allows connection via speaker outputs, reducing main speaker bass load.
Provides connection to the subwoofer output of an A/V receiver or processor.
Adjusts frequency response for optimal music or home theatre listening.
Selects connection mode for subwoofer output or line-level input.
Controls the automatic standby mode based on audio signal presence.
Details how to connect RCA cables for line-level audio input.
Adjusts the overall volume level of the subwoofer.
Sets the crossover point for blending subwoofer bass with main speakers.
Allows phase adjustment (0° or 180°) for optimal sound integration.
Explains how to connect speaker wires for high-level input.
Offers sound profile adjustments for music or movie playback.
Balances subwoofer output with main/satellite speaker levels.
Fine-tunes the high-frequency roll-off for seamless speaker blending.
Compensates for acoustic differences by matching subwoofer and speaker phase.
Optimizes bass response for music (extended) or theatre (controlled).
Configures crossover settings for receiver or subwoofer control.
Connects via speaker terminals from amplifier or receiver.
Connects main speakers to subwoofer outputs to offload bass duty.
Connects via RCA cables from A/V receiver's subwoofer out.
Placing the subwoofer near a corner for maximum bass output.
Placing the subwoofer near a wall but away from corners for balanced output.
Placing the subwoofer further into the room for least bass but best accuracy.