PTA522, PTA523 and PTA524 Automatic Silent Compressors Chapter 4: Troubleshooting
Page 14 ETN057391-D02
c. Air leak (See 4.1.5).
d. Clogged air intake filter. Clean with compressed air, or replace.
e. The ambient temperature is too high. Do not enclose the unit in a cupboard unless adequately ventilated.
f. Over-running. Ensure the compressor is the correct model for your work load.
4.2. Spare Parts
Defective parts must be replaced only by trained and authorized personnel; all possible safety regulations must be observed
in order to avoid personal injury or any damage to the equipment.
Spare parts are available on request from your local Thorlabs Tech Support contact.
To Next Page
Loading...