Accessories
Pupillo
16
Accessories
Pupillo
17
Mounting kit
A mounting accessory is included in the box.
This mounting accessory is designed to mount the
Pupillo on a ceiling or wall. After the Pupillo is
mounted, it can be rotated horizontally.
Please follow the steps to attach the mounting kit
to both your Pupillo and ceiling:
Step 1. Attach the
Pupillo to the base
of the mounting kit
Part A
Step 3. Mount Part B to
the wall or ceiling with
three fixing screws
Step 4. Hang the
Pupillo (Part A is
already mounted in
the Pupillo) on Part B
Step 5. Rotate the Pupillo
to adjust the angle, then
screw it tight using the
fixing screw to secure the
Pupillo in a specific
position
Step 2. Screw Part A
to the base mould of
the Pupillo
Part B
To Next Page
Loading...