4/10
INSTALLATION ON PC
1. Set your gamepad’s USB selector (12) to the PC position.
2. Connect the USB connector (10) to one of your computer’s USB ports. Windows XP or Vista will
automatically detect the new device.
3. Driver installation
The drivers are installed automatically. Follow the on-screen instructions to complete the installation.
4. Select Start/Settings/Control Panel and then double-click Game Controllers (or Gaming Options,
depending on your operating system).
The Game Controllers dialog box displays the gamepad’s name with OK status.
5. In the Control Panel, click Properties to configure your gamepad:
Test device: allows you to test and view the buttons, D-pad and axes for the 2 mini-sticks and for the
2 triggers.
You are now ready to play!
SELECTING THE NUMBER OF AXES ON PC
Selection of axes via “Software”: Once you have installed the “Advanced programming software”, on
page 1 of the Control Panel, click the number of axes you wish to use and then click OK.
Selection of axes via “Hardware”:
Press the MODE button (8) to select the number of active axes.
To Next Page
Loading...
Need help?
General
