WARNING
• In the event of malfunction during use due to electrostatic emission, please exit the game, switch off
your gamepad and unplug the device from your console. Resume normal game play by plugging
the device back in, then switch on the gamepad and launch the game again.
• Do not touch or move the mini-sticks when connecting your gamepad (to avoid disrupting the
calibration process).
• When you’re done using your gamepad, we recommend that you always set your gamepad’s
POWER switch (13) to the OFF position (to extend battery life).
INSTALLING BATTERIES
Insert 3 1.5V type LR03/AAA batteries in the battery compartment located at the back of the gamepad (14).
INSTALLATION ON NINTENDO® WII™
1. Switch on your console.
2. Open the “Nintendo® GameCube™ Controller” hatch situated at the top of your Wii™ console.
3. Connect your gamepad’s receiver connector (10) to port number 1 on your console.
4. Switch on your gamepad using the POWER ON switch (13).
5. Start up your game using your Wiimote™ controller.
You are now ready to play!
COMPATIBILITY
Your gamepad is compatible with:
• All “Virtual Console™” games
(available for download from the Wii™ Shop Channel)
• All “GameCube™” games
(that are compatible with your Wii™ console)
• (*) Certain “Wii™” games
(Please refer to the back of Wii™ game boxes to verify compatibility - A list of compatible Wii™
games is also available on our website: http://ts.thrustmaster.com.)
2/6
To Next Page
Loading...
Need help?
General
