AUTOMATIC CALIBRATION OF THE PEDAL SET
IMPORTANT
- Never connect the pedal set to the racing wheel’s base (or disconnect it from the base) when it is
connected to the Xbox console, or during gameplay (this could result in improper calibration).
Always connect the pedal set before connecting the racing wheel to the console.
- Once the racing wheel’s calibration is complete and the game has been started, the pedals are
automatically calibrated after a few presses.
- Never press the pedals during the racing wheel's self-calibration phase or while a game is loading!
This could result in improper calibration.
If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly
calibrated:
Power off your console and completely disconnect the racing wheel. Then reconnect all cables
(including the power supply cable and the pedal set), and restart your console and your game.
To Next Page
Loading...
