12
6. Installation on a support
VIPER TQS can be installed on different types of
supports. Most cockpits and supports available on the
market are already compatible with similar
Thrustmaster products (i.e. HOTAS Warthog).
Please keep in mind that VIPER TQS fe
atures a
powerful lever effect, and must therefore be firmly
attached.
Attach the base to your support using suitable M6
screws (not included), so as not to damage the handle.
A complete VIPER TQS blueprint is available at
https://support.thrustmaster.com/product/viper-
tqs/
Before each use
, make sure that VIPER TQS is still
properly attached to the support, according to the
instructions specified by the manufacturer.
Be sure to take into account the material that your
support is made of, and ensure that it is possible to
safely attach the product to it. VIPER TQS must be
used on a desk made of a solid material (i.e. MDF or
wood), without any hollow or glass components.
To Next Page
Loading...
