Thule BSTK2 - Finalizing Arm Attachment; Installation Step 4; Attaching Leveling Glides; Mounting Bike Holder Cradles

• Attach the knob (D) through the backside of the top C-Shaped tab and
tighten firmly
.
3c
A
D
J
•
Screw the four leveling glides (I) onto the bottom of the foot base
• Slide the four bike holder cradles (E) onto the bike support arms.
The indent faces upwards in the cradle to hold the bike. The cradles can slide
horizontally along the bike support arms to stagger bikes depending on
their widths.
4
I
E
E
E
E
E