Thule Glide 1 User Manual

51100989 - B
3
THULE CAR SEAT ADAPTER INSTALLATION
FOR GLIDE/URBAN GLIDE 1
A. Engage the parking brake on the child carrier.
B. Open the clips on the Thule Car Seat Adapter.
(See Image 1)
C. Locate the Thule Car Seat Adapter on the frame by
aligning the clips to a stud on the frame. (see Image 2)
D. Close the clips on the Thule Car Seat Adapter and lock
the secondary lever, repeat for other side.
(See Image 3)
E. Verify that the Thule Car Seat Adapter is securely
attached to the carrier by giving it a sharp pull away
from the carrier.
F. Unfold the Thule Car Seat Adapter. (See Image 4)
G. To remove the Thule Car Seat Adapter, open all clips
and lift the adapter off of the carrier.
H. To fold the carrier with the Thule Car Seat Adapter on it,
fold the Thule Car Seat Adapter, buckle the seat strap
and then fold the carrier.
1 3
2 4
WARNING
Always verify that the Thule Car Seat
Adapter is securely attached to the carrier,
especially after transporting the carrier in a
vehicle and folding it.

Thule Glide 1 Specifications

General

Brand	Thule
Model	Glide 1
Category	Stroller
Language	English