Thule Parkway 957 User Manual

501550902_02
PARKWAY (4 BIKE / 2 BIKE) 956/957/958
PARTS INCLUDED
pa
rt description
pa
rt
nu
mber
95
6
qt
y.
95
7
/ 95
8
qt
y.
A
upright/bike arm assembly – 1 –
B stinger – 1 –
C
M10 washer 951-1122-54 2 2
D
3/8" lock nut 853-5779 1 1
E 3/8" hex screw 853-5778 1 1
F M12 lock washer 956-1221-59 1 1
G M12 x 40 receiver bolt 908-1240-54 1 1
H
M12 washer 951-1224-54 1 1
I
M8 hex bolt 908-0870-54 1 1
J M8 washer 951-0816-54 2 2
K M8 lock nut 938-0800-54 1 1
L cradle 853-7887 8 4
M
cradle strap 852-3006-001 8 4
N
(4 bike) strap 753-2030-07 1 –
O (2 bike) strap 753-2030-08 – 1
• Socket wrench with 13mm (1/2"), 14mm (9/16"),
19mm (3/4") sockets and an adjustable wrench (6" or
larger) or 13mm (1/2"), 14mm (9/16"), 19mm (3/4")
wrench and an adjustable wrench (6" or larger)
TOOLS REQUIRED
M
N
O
H
K
GF
J
I
E
DC
BA
L
• No more than 4 bicyc
les should be carried on the
4 bike model Parkway.
• No more than 2 bicycles should be carried on the 2
bike model Parkway.
• Check tightness of all bolts and knobs periodically.
• Not intended for off-road use.
• Check straps for wear and replace if worn.
• Not intended for tandems or recumbents.
• Your vehicle must be equipped with a 2" or 1 1/4"
receiver hitch.
• Do not install on a trailer or other towed vehicle.

Thule Parkway 957 Specifications

General

Capacity	2 bikes
Weight	34 lbs
Material	Steel
Foldable	Yes
Maximum Bike Weight	35 lbs per bike
Type	Hitch
Mounting	Hitch
Compatibility	1.25" and 2" receivers
Locking	Yes
Tilt Function	Yes

Summary

Thule Parkway Bike Rack Installation and Usage

Parts Included

Lists all components included with the Thule Parkway bike rack for assembly.

Tools Required

Details essential tools needed for the installation and maintenance of the bike rack.

Step 1: Stinger and Cradle Assembly

Instructions for positioning the stinger into the cradle of the upper assembly.

Step 2: Securing Hitch Assembly

Guidance on assembling M8 bolt, washers, and locking nut, and tightening the hitch.

Step 3: Mounting to Vehicle Receiver

Procedure for sliding the hitch into the receiver and securing it with bolts and washers.

Step 4: Attaching Bike Arm Assembly

Instructions for positioning the bike arm assembly upright and securing it.

Step 5: Installing Cradle Straps

Guidance on installing straps onto the hooks of the cradles for bike securing.

Step 6: Loading and Securing Bikes

Recommendations for loading bikes, starting with the heaviest, and ensuring strap tightness.

Step 7: Using Load Strap

Instructions for using the provided load strap to secure all bikes to the main post.

Step 8: Rear Compartment Access

Procedure for accessing the vehicle's rear compartment with bikes loaded on the rack.

Step 9: Lowering Carrier

Instructions on how to safely lower the carrier to its built-in stop position.

Step 10: Security Features

Information on locking the carrier to the vehicle hitch using optional accessories.

Step 11: Locking Bikes to Carrier

Guidance on securing bikes to the carrier using built-in locking eyes and optional cable locks.