EasyManua.ls Logo

THUNDER TIGER MTA4 S28 User Manual

THUNDER TIGER MTA4 S28
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Other manuals for THUNDER TIGER MTA4 S28

Question and Answer IconNeed help?

Do you have a question about the THUNDER TIGER MTA4 S28 and is the answer not in the manual?

THUNDER TIGER MTA4 S28 Specifications

General IconGeneral
Engine Type2-stroke
Drive Type4WD
Height240mm
Scale1/8
Radio System2.4GHz
Tire TypeOff-Road
EngineThunder Tiger Pro-28

Summary

Introduction and Required Items

Introduction

Welcome and overview of the Thunder Tiger MTA-4 nitro monster truck and user guide.

Items Required for Operation

List of tools and components necessary to operate the model.

Safety Warnings and Initial Setup

General Warnings

Crucial safety precautions for operating and handling the model.

Unwrapping and Tire/Flag Installation

Steps to unpack the truck and install the tires and flag.

Radio Gear and Linkage Installation

Installing the Radio Gear

Detailed steps for installing servos, receiver, and battery components.

Installing Steering Servo Linkage

Connecting the steering linkage rod to the servo saver and rack.

Installing Throttle/Brake Linkage

Assembling and installing the throttle and brake control linkages.

Installing FWD/REV Linkage

Connecting the forward/reverse shifting mechanism linkage.

Radio System Preparation and Operation

Charging the Glow Plug Igniter

Procedure for charging the glow plug igniter for engine starting.

Preparing the Radio

Steps to prepare the transmitter and receiver for use.

Radio Battery Installation

Instructions for installing batteries into the transmitter and receiver.

Radio Operation

Basic procedures for turning the radio system on and off.

Operating Radio Steering Function

Testing and adjusting the steering response of the model.

Operating Radio Throttle/Brake and Reverse Function

Checking and verifying throttle, brake, and forward/reverse controls.

Linkage and Carburetor Adjustments

Adjusting Throttle / Brake Linkage

Fine-tuning the throttle and brake linkage for proper operation.

Adjusting Forward / Reverse Linkage

Setting the linkage for the forward and reverse transmission.

Adjusting Carburetor

Setting the high speed, idle, and low speed needles for optimal engine performance.

Fueling, Engine Break-in, and Storage

Fueling

Instructions on how to safely and correctly fuel the model.

Preparing the Engine

Steps to prepare the engine for starting, including glow plug check.

Starting the Engine

Procedures for starting the engine using pull start or hex start.

Stopping the Engine

Safe methods for shutting down the engine.

Engine Break-in

Procedure for breaking in a new engine for optimal performance.

Storing Your Car

Essential steps for long-term storage to maintain the model's condition.

Chassis Setup and Tuning

Two-Speed Adjustment

Adjusting the shift point for the two-speed transmission.

Front & Rear Toe-In / Toe-Out

Adjusting the toe angle for the front and rear wheels.

Front & Rear Camber

Adjusting the camber angle for the front and rear suspension.

Ride Height

Adjusting the vehicle's ride height using preload clips.

Slipper Clutch

Adjusting the slipper clutch for drivetrain protection.

Suspension and Gearing Options

Shock Springs

Information on different shock spring rates and their effects.

Optional Gearing

Details on available gearing options for transmission customization.

Model Features

Thunder Tiger MTA-4 Features

Overview of key features and design aspects of the MTA-4 Monster Truck.

Related product manuals