THUNDER TIGER e-MTA User Manual

This radio control model car is not a toy! Before beginning assembly, please read this manual thoroughly.
本產品為高性能模型非一般玩具，組裝與操作前，請詳閱本產品說明書。
The contents are subject to change without prior notice due to product improvements and specificatrion changes.
本套件所附之零件可能跟圖示有所差異。因產品後續之設計研發或功能不斷改善之因，我們將保留產品規格變更權力，不再另行通知使用者。
1:8 TH SCALE BRUSHLESS 4WD MONSTER TRUCK
1/8 無刷電動四驅大腳卡車
Thunder Tiger Corporation guarantees this model kit to be free from defects in both material and workmanship. The total monetary value under
warranty will in no case exceed the cost of the original kit purchased. This warranty does not cover any components damaged by use or modification.
Part or parts missing from this kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase.
To receive part or parts under warranty, the service center must receive a proof of purchase and/or the defective part or parts. Should you find a
defective or missing part, contact the authorized Thunder Tiger Service/Distributor nearest you. Under no circumstances can a dealer or distributor
accept return of a kit if assembly has started.
WARRANTY
品質保證事項
本公司對於製造過程中產生之瑕疵，負完全品質保證責任。
保證事項僅限於產品本身與隨產品所附之零配件。
品質保證不包含下列事項
因使用、組裝或調整本產品所發生之損壞。
其他所有非產品本身品質所造成之損壞。
No.6403-F / A
Instruction Manual & Parts Catalogue
操作說明書及零件包型錄

THUNDER TIGER e-MTA Specifications

General

Brand	THUNDER TIGER
Model	e-MTA
Category	Motorized Toy Car
Language	English

Summary

Warranty

Safety Precautions

Items Required for Operation

Charging the Battery Pack

Wheel and Tire Preparation

Preparing the Chassis

Battery Configuration

Battery Installation

Battery Chart

ACE RC Cougar GP3 2.4GHz System

Transmitter Controls

Overview of the transmitter's buttons, switches, and features.

Binding Process

Fail Safe (F/S) Function Setting

Radio Operation

Steering Function Operation

Slipper Clutch System Adjustment

ESC Adjustment

Basic Driving Operations

Front & Rear Toe-In/Toe-Out Adjustment

Adjusting the angle of the front and rear wheels relative to the car's centerline.

Front & Rear Camber Adjustment

Adjusting the tilt of the front and rear wheels relative to the vertical axis.

Shock Adjustment

Adjusting the suspension stiffness by adding or removing preload clips.

Maintenance After Running

Procedures for cleaning and storing the car after use.

Driving Tips

Troubleshooting

Product Overview

Radio and ESC Maintenance

Servo Maintenance

Procedures for maintaining the servo components.

Battery Installation

Wheel Maintenance

Front Suspension Maintenance

Rear Suspension Maintenance

Differential Maintenance

Shock Maintenance

Slipper Clutch Maintenance

Center Drive Gear Assembly

Motor & Pinion Gear Assembly

Slipper Clutch Assembly

Transmission Assembly

Front Assembly

Push-Rod Assembly

Assembly of the push-rods for suspension.

Front Suspension Assembly

Detailed assembly steps for the front suspension.

Front Bulkhead Assembly

Assembly of the front bulkhead component.

Front Damper Assembly

Assembly of the front shock absorbers.

Bellcrank Assembly

Assembly of the bellcrank mechanism.

Front Shock Tower Assembly

Assembly of the front shock tower.

Front Turnbuckle Assembly

Assembly of the front turnbuckles.

Rear Assembly

Rear Suspension Assembly

Detailed assembly steps for the rear suspension.

Rear Shock Tower Assembly

Assembly of the rear shock tower.

Rear Damper Assembly

Assembly of the rear shock absorbers.

Rear Turnbuckle Assembly

Assembly of the rear turnbuckles.

Rear Bulkhead Assembly

Assembly of the rear bulkhead component.

Differential Assembly

Assembly of the differential units.

Chassis Assembly

Complete Car Assembly

e-MTA Truck Spare Parts List

e-MTA Truck Optional Parts List